Welder jobs in Charlotte, North CarolinaCreate job alerts

Job Description Travel Welder/Fabricator Position Job Title: Structural Welder/Fitter $45 & $140 in per diem. This position is located in Newport News, Virginia paying $45 and $140 in per diem Job Description We are seeking an experienced Advanced Shipfitter with a minimum of four years of commercial or naval experience as a first-class Shipfitter The ideal candidate will have extensive skills in single pass tack welding, burning, heating, and the ability to read and comprehend complex structural assembly drawings, blueprints, and sketches. Responsibilities • Perform multi-pass tack welding using the Shielded Metal Arc Welding (SMAW) process., • Operate burning and heating equipment, specifically oxygen/propane burning torches., • Interpret complex structural assembly drawings, blueprints, and sketches, including weld symbols, material types, datum, and reference lines., • Comprehend fractional dimensions using a ruler and lay off piece parts for fabrication and assembly., • Assemble structural piece parts according to specifications with high-quality standards., • Work effectively in physically demanding environments such as shipbuilding or steel fabrication., • Ensure compliance with OSHA regulations relevant to the shipbuilding industry., • Single & Multi Pass Tack Welding, • Burning using Oxygen/Propane Burning Torch, • Heating using Oxygen/Propane Heating Torch, • Ability to read and interpret complex structural assembly drawings, blueprints, and sketches, • Ability to comprehend fractional dimensions using a ruler The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Charlotte,NC. Application Deadline This position is anticipated to close on Oct 20, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionBenefits/Perks • Flexible Schedule, • Competitive Pay, • Read and interpret blueprints, drawings, and schematics, • Plan layout and measurements of structural components, • Interpret requirements to select the most appropriate welding equipment for the job, • Operate angle grinders, calipers, rulers, and other hand and power tools, • Use manual and semi-automatic welding equipmentQualifications, • Previous experience as a Welder, • Professional Certification (AWS welding certificate) is preferred, • Experience with a variety of welding equipment and tools, • Ability to read and interpret blueprints, schematics, and other technical documents and drawings, • Understanding of all health and safety guidelines, • Attention to detail

Job Description Hiring for a Welder/Fabricator Hours: 6pm-6am M-TR Pay: 25-30/hr Job Description We are seeking skilled Welders and Fabricator Fitters for our growing team. Due to a backlog of projects and continued success in securing new work, we are expanding our team with three additional openings. Our company is known for its unique quality control and efficiency in production, particularly in using larger steel pieces which results in fewer welding seams. Responsibilities • Weld to code with precision and care., • Work with stainless and carbon steel materials., • Engage in fabrication tasks using mechanical aptitude., • Conduct tolerance checks and assembly through precise measurement., • Strong work ethic and pride in quality workmanship., • Ability to weld to code standards., • Experience with stainless and carbon steel welding., • Fabrication experience., • Mechanical aptitude., • High school diploma or GED., • Proficiency in welding techniques such as MIG and TIG. Join a company with a great culture and minimal workplace drama. Experience a supportive work environment where your skills and dedication are valued, and contribute to a team that takes pride in quality production. Work Environment Work in an open air manufacturing environment with shifts from Monday through Thursday, 6 PM to 6 AM. Engage in welding, fabrication, and grinding tasks in a dynamic setting. Pay and Benefits The pay range for this position is $22.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in CHARLOTTE,NC. Application Deadline This position is anticipated to close on Oct 22, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Trailer Mechanic W/CDL Class-A License Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for a trailer mechanic with 2+ years of mechanical and/or tank trailer repair experience, and a CDL Class-A Driver license for our Charlotte, NC location! Address: 201 Black Satchel Drive, Charlotte, NC. 28216 Shift Hours: Monday through Friday, 7:30 AM to 4:00 PM, occasional overtime Pay Range: $19.00 to $36.00 per hour, dependent on experience. (Skill-based pay rate reviews and potential increases every 6 months.) Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • Must have a CDL-Class A license, • TIG aluminum, stainless or carbon welding experience (optional), • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description JOB SUMMARY: Installs posters and bulletins as well as performs maintenance as required to the physical structure and surrounding property. In addition, performs work on all Digital Assets as required. ESSENTIAL FUNCTIONS OF POSITION INCLUDE, BUT ARE NOT LIMITED TO THE FOLLOWING:* • The ability to climb without restrictions fixed, portable and/or extension ladders to heights up to 125 feet multiple times daily., • The ability to work from elevated platforms up to 125 feet in height for up to 70% of the work day., • Must be able to lift weight up to 100 lbs. without restrictions or limitations through demonstrated safe lifting practices., • Working knowledge of or ability to learn the proper use of an oxygen/acetylene torch., • Working knowledge of or ability to learn the proper use of an AC/DC welder., • Must be able to safely operate or have the ability to learn to operate gas-powered equipment, such as lawn mowers, chain saws, generators, compressors, paint sprayers, etc., • Is required to possess a valid driver’s license in order to operate company vehicles., • Utilize all safety related equipment without exception as mandated by Adams Outdoor Advertising operating procedures., • Understanding and possession of basic mathematics skills such as adding, subtracting, multiplying and dividing., • Must have a full range of motion in order to install and maintain posters and bulletin signage., • Meet maximum weight restrictions of 265 pounds due to manufacturer requirements on safety related equipment used to work in elevate work environment., • The ability to work in all weather conditions when necessary., • The ability to tolerate the risk of expose associated with an outdoor environment., • Comply and adhere to all company policies, procedures and guidelines without exception., • High School or equivalent degree., • Ability to communicate effectively with the external clients and the internal client at all levels of personnel., • Highly adaptable to changing work environments, • Must be able to travel as required., • Must prioritize and execute tasks and assignments. #LI-Onsite Powered by JazzHR 5ABQHm3Ha7

American Welding, LLC, a division of American Equipment Holdings, is one of the leading overhead crane solutions providers in the United States. Over the years, our ability to grow and set ourselves apart from the competition is the result of a tried and true philosophy – take care of our customers and take care of our people. We also believe that our people matter, which is why we are committed to providing our team members with competitive wages, attractive benefit offerings, and abundant training offerings. As one of the fastest growing companies in our industry, new opportunities are regularly available that enable our team members to develop, grow, and pursue their career passions. Position Summary: The Welder / Fabricator will demonstrate and work safely in all aspects of the job to determine appropriate welding process. Be a safety champion within the team, lead and model safe behaviors and drive continued safety improvements. Responsibilities: • Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process., • Cut, fabricate, and weld metal parts to customer specifications Required Skills/Abilities • Manage time efficiently, • Attention to detail, • Must be able to stand for the duration of an 8-10 hour shift., • Must be able to lift up to 50lbs, • Must be able to visually inspect completed work, • Must be able to respond to audio prompts, • Must be able to communicate effectively with supervisors and coworkers Education and Experience • 1-2 years’ welding experience, • Ability to demonstrate proficiency in MIG, TIG, and stick welding is preferred. What we offer: We offer competitive compensation and benefits package, including health insurance, retirement plans, and paid time off. • Cigna Health Insurance (Kaiser in CA), • FSA & HSA healthcare employer contribution, • Critical Illness, Accidental, and Hospital Indemnity Plans, • Dental and Vision Plans, • Company paid STD & LTD Disability Insurance, • Educational and Tuition Reimbursement, • Maternity (12-wks) and Paternity leave, • Employee Assistance Program, • Basic & Voluntary Life AD&D, • 4% 401K Employer Match, with 6% of your Contribution, • Company Paid Time Off (PTO), • Company provided PPE, • Discounts on products and services Our Commitment to Inclusion & Belonging: At American Equipment Holdings, we are dedicated to engaging with the widest possible range of talent. We believe that diverse perspectives drive innovation and engagement, enabling us to attract creative individuals and develop exceptional products, services, and solutions. We encourage all qualified candidates to apply. We are proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Proof of right to lawfully work in the United States required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Compensation details: 22-24 Hourly Wage PI9432a109b091-37820-38809103

Job DescriptionSalary: Pipe Welder Mechanical Construction Location: Charlotte, North Carolina Join a team where your skills matter, your work is valued, and your career can grow. Green Mechanical Construction has over 40 years of experience in mechanical construction, serving commercial, industrial, educational, institutional, and medical sectors. Since 1983, weve built lasting relationships with clients, employees, and communities by delivering high-quality, on-time, and on-budget projects. Headquartered in Glasgow, KY, with offices in Charlotte, NC and Lexington, KY, were licensed in 15 states and committed to setting the industry standard. What You'll Do: As a Pipe Welder, you'll be an important part of our field team, working on a variety of challenging and rewarding projects. Youll perform high-quality pipe welding and other mechanical trade tasks, contributing to the completion of mechanical systems. Key Responsibilities: • Weld carbon steel pipe and TIG weld stainless steel pipe to industry standards., • Read and interpret construction drawings to determine pipe placement and connections., • Perform pipe fitting, thread pipe installation, Victaulic grooving, plumbing, or ductwork as needed., • Collaborate with other trades and coordinate work schedules for efficiency., • Maintain consistent quality control and follow all safety and building code requirements., • Travel to job sites across the Carolinas and occasionally to Florida as needed. What You Bring: Were looking for a versatile and skilled tradesperson who can handle a variety of tasks while maintaining a high standard of workmanship. Ideal Qualifications: • Certified pipe welder or the ability to pass a pipe weld certification., • Proficiency in carbon steel pipe welding and TIG welding stainless steel., • Ability to read and understand construction documents., • Experience with multiple trades, including pipe fitting, threaded pipe, Victaulic grooving, plumbing, or ductwork., • Strong problem-solving skills and adaptability on the job., • Willingness to travel to multiple locations as required., • Must pass a background check and drug screen. Why Work With Us? We care about our team and show it through a competitive pay structure, growth opportunities, and a full benefits package that supports you and your family. We Offer: • Competitive Pay, • Health, Dental & Vision Insurance, • Short-Term & Long-Term Disability Coverage (Additional Supplemental Policies Available), • 401(k) with Company Match, • Company Vehicle (for qualifying roles), • Paid Vacation & Holidays, • Merit and Performance Based Bonus Program, • Opportunities for Career Advancement, • Supportive Team Environment Ready to Apply? If you're looking for more than just a joband want to be part of a company that values your craftsmanship and potentialwed love to hear from you.

Job Description Job Title: Welder/Fabricator (NIGHT SHIFT) Location: Charlotte, NC Company Overview: Bendel Tank and Heat Exchanger, LLC, a division of TransTech Group, LLC is a leading manufacturer of custom Carbon Steel, Stainless Steel and Nickel Alloy vessels per ASME, API, TEMA and UL specifications. Having been in business over 50 years Bendel serves several industries including: chemical, petrochemical, pharmaceutical and industrial food manufacturing. Bendel has a strong company culture built on a family atmosphere where success is defined by the impact on the lives of our stakeholders: our team members and their families, our clients, our supply partners and our community. Job Summary: We are seeking a skilled Welder to join our team on the night shift, specializing in the fabrication and welding of components for tanks and vessels. The ideal candidate will interpret blueprints and technical drawings to plan and execute precise layouts, utilizing specialized welding techniques including TIG, MIG, and plasma cutting, with experience in welding, fabricating, and fitting. This position works 6pm-6a M-Th with opportunity for overtime depending on workload. Primary functions and duties: • Interpret blueprints, drawings, and measurements to plan layouts., • Use specialized welding equipment including TIG, MIG, and Plasma cutters., • Fit, Fabricate and Weld components to tanks and vessels such as nozzles, manways, ladders, handrails, and platforms. Pipe joints, tube to tube sheets, and thermal jackets., • Follow and enforce strict shop safety regulations such as wearing safety glasses, heat-resistant gloves, protective masks, and safety shoes., • Weld components in flat, vertical, and overhead positions, • Weld components using manual or semi-automatic welding equipment., • Maintain equipment in a condition that does not compromise safety. Good housekeeping, • Work 40 hrs./week minimum plus OT as needed based on workload. Current work week is 48/wk. M-F., • Work with Team members to ensure top quality and high standards while welding on S.S., C.S. and High Nickel alloys. The ideal candidate will possess the following: • Read blueprints and utilized those to lay out work and build products., • Read and understand measurements., • Layout, fit, weld nozzles and other parts inside and out per the drawings., • Operate an overhead crane., • Must pass ASME 6G SCH.80 (SA312TP316L) 2" pipe test using GTAW process., • Must pass ASME 2G plate (SA36 & SA240-304) test using GMAW process., • Must pass a drug test and background check., • Lift up to 50 lbs. Work safely from a ladder. Able to work inside a tank/vessel., • Must have TIG & MIG welding experience. Pulsed MIG is preferred., • Stainless Steel, Carbon Steel, and High Nickel alloys. Salary: • $52,000 to $67,000 depending on experience and skills Benefits Designed to Work for You: • Free HSA health plan or traditional PPO, • 401(k) with generous company match (Safe Harbor), • Dental, vision, and optional coverage like accident & critical illness insurance, • HSA and FSA accounts to save on healthcare costs, • Company-paid Life, Long Term Disability, and AD&D insurance, • Confidential support for mental health, family matters, legal concerns, and more through our Employee Assistance Program, • Discounts on gyms, shopping & entertainment, • Health benefits kick in fast – first of the month after 30 days Time Off We offer a variety of paid time off options to support rest, wellness, and personal needs: • Paid Time Off, • Paid Holidays, • Bereavement Leave This organization provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #Bendel

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. nWPlFM7LAr

Company Overview: If a culture of excellence, innovation and ownership is what you're searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve's position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Welder/ Repair Technician, with a focus in welding is primarily responsible for the repair and fabrication welding of new and customer property nuclear pump components. In addition, they will assist in processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, pumps and components. The Welder/ Repair Technician will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The Welder/ Repair Technician independently selects and uses the proper equipment required in welding operations as described by work instructions/routers. This position also ensures all forms and documentation are complete prior to submission to quality assurance and/or production supervisors. Work schedule: Monday to Friday from 7:30 am to 3:30 pm. Overtime will be required. Location: Charlotte, NC. Must be available to travel to our site in Memphis, TN when needed. Responsibilities: • Ability to independently, accurately and efficiently weld repair/fabricate new and customer property pump components in the 2G, 3G and 6G positions., • Interface with production supervisor, shop lead, production planner, and project management.-Follow all routers, procedures and Flowserve best practices., • Significant experience with the proper and safe use of various common power and hand tools needed for assembly., • Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process., • Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges., • Ability to work efficiently within fixed time windows for each manufacturing process., • Communicate clearly to peers and supervisors any related job issues., • Coordinate and interface with production management, quality assurance and engineers as necessary., • Paint when required, tag, and prep equipment prior to shipment to the customer., • Utilize cranes, lifting devices, and fork trucks., • Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects., • HS Diploma / GED and 3-5 years relevant experience, particularly in TIG welding., • Certified, or able to be certified, to weld GTAW/TIG in 2G, 3G and/or 6G positions., • Ability to understand work instructions, safety procedures, and company policies., • Comply with all Flowserve policies and procedures., • Able to read and interpret prints, shop drawings, assembly checklists, and other written work instructions., • Basic computer skills including understanding of Microsoft Office Package, • Ability to prioritize and manage multiple tasks in a fast-paced and changing work environment., • Attention to detail and process-oriented mindset with results driven background., • Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts., • Must be able to work overtime, weekends, and holidays as the business dictates., • Must be willing to travel to secondary repair facility., • Must be a US citizen., • Fabrication experience within the nuclear, O&G industries., • Excellent communication skills both written and verbal., • Excellent organizational skills, able to problem solve, and prioritize work assignments., • Prior experience working in a fast-paced and unpredictable environment around repair services., • Medical, Dental & Vision Insurance (including FSA and HSA options), • Life Insurance + Supplemental Life, Child, Spousal, and AD&D Insurance, • Short and Long Term Disability, • Retirement Planning, 401(k) plan, & Financial Wellness Resources, • Educational Assistance Program Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Req ID : R-16221 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to [email protected]. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

Manpower - JobID: 5773379 [Fabricator] As a Welder at Manpower, you'll: Select equipment and plan layout, assembly, and welding; Lay out, position, align, and fit components together; Bolt, clamp, and tack-weld parts to secure in position for welding; Set up equipment and weld parts, using MIG/TIG/T

Company Overview: If a culture of excellence, innovation and ownership is what you're searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve's position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Welder/ Repair Technician, with a focus in welding is primarily responsible for the repair and fabrication welding of new and customer property nuclear pump components. In addition, they will assist in processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, pumps and components. The Welder/ Repair Technician will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The Welder/ Repair Technician independently selects and uses the proper equipment required in welding operations as described by work instructions/routers. This position also ensures all forms and documentation are complete prior to submission to quality assurance and/or production supervisors. Work schedule: Monday to Friday from 7:30 am to 3:30 pm. Overtime will be required. Location: Charlotte, NC. Must be available to travel to our site in Memphis, TN when needed. Responsibilities: • Ability to independently, accurately and efficiently weld repair/fabricate new and customer property pump components in the 2G, 3G and 6G positions., • Interface with production supervisor, shop lead, production planner, and project management.-Follow all routers, procedures and Flowserve best practices., • Significant experience with the proper and safe use of various common power and hand tools needed for assembly., • Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process., • Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges., • Ability to work efficiently within fixed time windows for each manufacturing process., • Communicate clearly to peers and supervisors any related job issues., • Coordinate and interface with production management, quality assurance and engineers as necessary., • Paint when required, tag, and prep equipment prior to shipment to the customer., • Utilize cranes, lifting devices, and fork trucks., • Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects., • HS Diploma / GED and 3-5 years relevant experience, particularly in TIG welding., • Certified, or able to be certified, to weld GTAW/TIG in 2G, 3G and/or 6G positions., • Ability to understand work instructions, safety procedures, and company policies., • Comply with all Flowserve policies and procedures., • Able to read and interpret prints, shop drawings, assembly checklists, and other written work instructions., • Basic computer skills including understanding of Microsoft Office Package, • Ability to prioritize and manage multiple tasks in a fast-paced and changing work environment., • Attention to detail and process-oriented mindset with results driven background., • Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts., • Must be able to work overtime, weekends, and holidays as the business dictates., • Must be willing to travel to secondary repair facility., • Must be a US citizen., • Fabrication experience within the nuclear, O&G industries., • Excellent communication skills both written and verbal., • Excellent organizational skills, able to problem solve, and prioritize work assignments., • Prior experience working in a fast-paced and unpredictable environment around repair services., • Medical, Dental & Vision Insurance (including FSA and HSA options), • Life Insurance + Supplemental Life, Child, Spousal, and AD&D Insurance, • Short and Long Term Disability, • Retirement Planning, 401(k) plan, & Financial Wellness Resources, • Educational Assistance Program Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Req ID : R-16221 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to [email protected]. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

A Snapshot of Your Day This is a 4 days x10 hours Night position. The primary purpose of this position is to be skilled in the use of manual GTAW welding of superalloys including Inconel and Hastelloy. Thin wall welding and passing a 6G Butt Joint Open Root is a requirement. Experience with fitting and coldworking materials to shape within requirements is a must. Success is dependent upon flexibility in working urgent priorities and effectively completing daily work assignments day to day. \t How You’ll Make an Impact • Perform a wide variety of layout/fitting/ welding required to complete restore service-ran Combustion components to Engineered requirements., • Cold work and form components to meet tolerance requirements., • Use hand tools, grinders, burrs etc, to recondition surfaces to specifications, • Interpret detailed drawings/sketches, blueprints, manufactures specifications, etc., and determines necessary tools to perform required machining operations., • Using material handling devices (Jib & B/C cranes and forklifts), loads/unloads parts from machines and/or assists crane operator., • Must be able to pass the following welding qualification tests: Inconel GMAW 6G Butt Joint Open Root to the ISO standard., • Must have high school diploma and have 1-3 years of industrial-welding-assembly experience or formal training., • Ability to obtain fork truck and crane license. Prefer to have previous experience., • Ability to use basic shop math and precision measuring equipment., • Must be able to pass standard hearing, vision, and PFT tests. Career Readiness/Work Keys Certificate – Silver Status required, • Required to lift / move 50lbs of materials About the Team Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards/Benefits • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match

A Snapshot of Your Day As a Core Builder Welder, you’ll support generator production by performing precision welding and core assembly tasks. You’ll start each day with a safety briefing and collaborate with the team to meet daily goals. Key responsibilities include reading welding blueprints, operating Pulse MIG and burning equipment, and fabricating components. You’ll ensure quality through electronic documentation and reporting, while also guiding and training others. This role requires attention to detail, collaboration, and a strong dedication to safety and efficiency. How You’ll Make an Impact • Must be highly proficient in reading and interpreting welding drawings and blueprints., • Performing various welding tasks including Pulse MIG (GMAW), air-arc, and manual burning; weld generator core to frame/bedplate and rail car., • Assembling generator cores using appropriate tools, torque/tension bolts per specifications, and fabricate part pieces as needed., • Maintaining quality by completing electronic instruction sheets, reporting material issues, and communicating missing components to supervisors., • Must have high school diploma or equivalent., • 1-3 years of industrial-mechanical experience is required with electrical generator or motor mechanic experience preferred., • Ability to acquire fork truck and crane license. Prefer to have previous experience., • Ability to use basic shop math, basic Windows and digital literacy, precision measuring equipment. About the Team Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards/Benefits • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits

A Snapshot of Your Day This is a 4 days x10 hours Night position. The primary purpose of this position is to be skilled in the use of manual GTAW welding of superalloys including Inconel and Hastelloy. Thin wall welding and passing a 6G Butt Joint Open Root is a requirement. Experience with fitting and coldworking materials to shape within requirements is a must. Success is dependent upon flexibility in working urgent priorities and effectively completing daily work assignments day to day. How You'll Make an Impact \n • Perform a wide variety of layout/fitting/ welding required to complete restore service-ran Combustion components to Engineered requirements. \n, • Cold work and form components to meet tolerance requirements. \n, • Use hand tools, grinders, burrs etc, to recondition surfaces to specifications\n, • Interpret detailed drawings/sketches, blueprints, manufactures specifications, etc., and determines necessary tools to perform required machining operations.\n, • Using material handling devices (Jib & B/C cranes and forklifts), loads/unloads parts from machines and/or assists crane operator.\n \n • Must be able to pass the following welding qualification tests: Inconel GMAW 6G Butt Joint Open Root to the ISO standard. \n, • Must have high school diploma and have 1-3 years of industrial-welding-assembly experience or formal training.\n, • Ability to obtain fork truck and crane license. Prefer to have previous experience.\n, • Ability to use basic shop math and precision measuring equipment. \n, • Must be able to pass standard hearing, vision, and PFT tests. Career Readiness/Work Keys Certificate - Silver Status required \n Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards/Benefits \n • Career growth and development opportunities\n, • Supportive work culture\n, • Company paid Health and wellness benefits \n, • Paid Time Off and paid holidays\n, • 401K savings plan with company match\n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Job Description Combo Welder - Nuclear EnergySolutions is hiring nuclear welders for the fall outage season! A Nuclear Combo Welder is a highly skilled professional responsible for the safe application of welding techniques to join, fabricate, and repair metal and other weldable materials within a nuclear facility. This role requires a deep understanding of welding processes to ensure the precise and reliable operation of critical equipment. You will interpret blueprints, specifications, diagrams, or schematics to perform welding processes, ensuring all work complies with relevant codes. Must be able to obtain nuclear unescorted access, including meeting fitness for duty requirements. ESSENTIAL FUNCTIONS: • Perform all job duties safely according to requirements. \n, • Demonstrate proper use and care of hand tools and measuring devices. \n, • Pass the welder qualification test according to job specifications and appropriate codes. \n, • Properly purge and monitor stainless steel piping. \n, • Demonstrate proper use and care of power tools. \n, • Demonstrate proper use and care of a welding machine. \n, • Perform acceptable welds in all positions according to job requirements and governing codes. \n, • Weld must be able to pass a bend or x-ray test. \n, • Perform cleanup duties. \n, • Apply craft-related math skills. \n, • Perform acceptable work at varying heights (such as ladders, scaffolds, etc.). \n, • Ensure proper ventilation for welding (e.g., hexavalent chromium). \n, • Wear a respirator as needed (blood pressure no higher than 150/90). \n, • High School diploma or equivalent. \n, • 3+ years of experience. \n, • Prior nuclear power plant experience, highly desired. \n, • Must be able to obtain nuclear unescorted access, including fitness for duty requirements. \n, • Successful completion of all training including, Radiation Worker Training, Plant Access Training, Fitness for Duty, etc. \n, • Ability to understand and carry out written and oral instructions. \n, • Ability to assemble and disassemble objects and operate small equipment and power tools. \n, • Availability for shift work, if needed. \n, • Ability to support other crafts as requested. \n, • Ability to work at varying heights, in cramped quarters, extreme heat and/or cold, and loud environments (above 89 decibels). \n, • Knowledge of relevant processes and procedures. \n, • Ability to obtain and maintain knowledge of technical manuals and procedures. \n, • Ability to pass specific training and qualifications. \n, • Willingness to work overtime, including shift work, weekends, and holidays as needed. \n, • Visual acuity, balancing, stooping, reaching, walking, manual dexterity, grasping, feeling, hearing, talking. \n, • Capacity to think, concentrate, and focus for long periods. \n, • Ability to read and write complex documents in English. \n, • Capacity to reason and make sound decisions. \n, • Ability to express thoughts orally. \n, • Strategic thinking and planning for growth. \n, • Ability to walk job sites and climb. \n, • Ability to lift a minimum of 50 lbs.\n\n Meet Your Recruiter Kayci Wilbanks

A Snapshot of Your Day The primary job requirements of this position are to perform a wide variety of hand skill operations to disassemble / re-assemble turbine rotors and related parts to meet engineering drawing requirements. How You'll Make an Impact\n • Work independently and with teammates to complete blading, welding or various other tasks to new and service repair Steam Rotor Turbine components.\n, • Perform a wide variety of operations including but not limited to disassembly through air arc and manual methods, operation of sand blast and hone equipment, and re-assembly of turbine rotors and related parts to meet engineering drawing requirements.\n, • Conduct metal deformation processes via machine and manual methods for rivet forming. Also, conduct various machining operations using manual milling machines, surface grinders, mag base/radial drills for sizing, fitting rotating air foils, and induction heating for component assembly.\n, • Weld and braze activities for joining blade lugs and assembly of blade erosion control.\n, • Use precision instruments to measure frequency, temperature, and size for assembly, fitting and final product quality checks.\n, • Partner with Manufacturing Engineers to resolve challenges and find solutions.\n\nWhat You Bring\n, • Sound knowledge in the use of basic shop math, reading complex drawings, specifications and use of various precision instruments\n, • A High School diploma or equivalent is required along with 3-5 years of experience in close tolerance handwork.\n, • Must possess or pass associated 6G weld test\n, • Have ability to obtain fork truck and critical lift crane licenses.\n Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards\n • Career growth and development opportunities\n, • Supportive work culture\n, • Company paid Health and wellness benefits\n, • Paid Time Off and paid holidays\n, • 401K savings plan with company match\n, • Family building benefits\n #barcode Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Job Description: PNA is searching for a Welding Operator on 3rd shift (11 PM - 7:30 AM, Sunday - Thursday) who is responsible for basic welding to produce per quality specifications in an efficient and safe manner. This role is located at our Charlotte, NC manufacturing facility and includes a per hour shift differential. PNA Construction Technologies is a business unit of ITW-Illinois Tool Works and specializes in the manufacture and supply of innovative products for the concrete flooring industry. Our products are designed to provide strategic load transfer and joint protection in a concrete slab or pavement. We take pride in our commitment to providing the best performing products in the concrete flatwork industry. Customers also value our top-tier design support, knowledgeable and professional employees, and quality manufactured products made in the USA. Focusing on the needs of our end-users enables us to customize our product offering and service based on their requirements. ITW offers its employees a path for advancement, a competitive salary, and a comprehensive benefits package designed to help employees care for themselves, their families, and their futures. Job Requirements: \n • High School Diploma or GED.\n, • Tack Welding experience preferred.\n, • Experience in use of hand tools, including battery powered hand tools, and pneumatic tools.\n, • Manufacturing experience highly preferred (setup, operate, and knowledge of preventative maintenance).\n, • Focus on quality control.\n, • Clear ability to communicate & instruct on welding assembly.\n, • Team player - able to collaborate with colleagues.\n, • Must be able to lift up to 50 pounds.\n\n Core Responsibilities: \n • Performs ordinary and repetitive hand welding operations.\n, • Operates Welding equipment, regulates current and voltage for proper fusion of metals.\n, • Selects size and type of rod or wire appropriate for metal and welding application.\n, • Makes decisions consistent with priorities set forth by Production Manager or Plant Manager.\n, • Contributes to team effort by accomplishing results as needed for daily production goals.\n, • Follows all safety policies, rules, and best practices.\n, • Facilitate learning/training through a variety of delivery methods including hands-on, and one-on-one to welders of varying skill levels.\n, • Ability to communicate the process of welding plates in alignment with your current position title.\n, • Must be able to test production line units and troubleshoot for production lines.\n\n\n, • Reviews present equipment, production procedures and makes recommendations that may improve productivity and reduce operation cost.\n, • Communicates all issues to Production Manager or Plant Manager to obtain additional resources, or resolutions.\n\n\n, • Prioritizes and maintains workflow and ensures use of proper tools and materials.\n, • Interacts with teammates to resolve problems that interfere with productivity and our culture of respect, trust, and integrity.\n\n\n, • Document actions by completing quality assurance forms consistently and accurately.\n, • Accurately reports daily production.\n\n, • Other duties assigned by Production Manager or other members of management.\n Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential duties and responsibilities of this position, within typical manufacturing working conditions. While performing the duties of this position, the employee will be exposed to fumes, heat and dust, climate variances and moving mechanical equipment typically found in a manufacturing environment. The noise level in the work environment is high when exposed to the manufacturing areas. Certain personal protective equipment is required when in the manufacturing areas. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: While performing the duties of this job, the employee is regularly required to use hands to handle or feel; frequently required to walk, stand, talk, hear, reach with hands and arms and occasionally required to sit on a 4-foot-high forklift. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision and the ability to adjust focus, mount and dismount power industrial vehicle using arms to grip and pull him/herself on to forklift. ITW Benefits: Our employees enjoy competitive, merit-based salaries, plus excellent benefits including: \n • Health, Vision and Dental Insurance\n, • Company Paid Life Insurance/Short and Long-Term Disability\n, • 401k Plan with generous company match\n, • 3 weeks' vacation, 5 sick days, and 8 holidays\n, • End of year company closure\n, • Flexible spending accounts\n\n Compensation Information: $19.50/hour + $2.25 Shift Diff ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

Job Description Combo Welder - Nuclear EnergySolutions is hiring nuclear welders for the fall outage season! A Nuclear Combo Welder is a highly skilled professional responsible for the safe application of welding techniques to join, fabricate, and repair metal and other weldable materials within a nuclear facility. This role requires a deep understanding of welding processes to ensure the precise and reliable operation of critical equipment. You will interpret blueprints, specifications, diagrams, or schematics to perform welding processes, ensuring all work complies with relevant codes. Must be able to obtain nuclear unescorted access, including meeting fitness for duty requirements. ESSENTIAL FUNCTIONS: • Perform all job duties safely according to requirements. \n, • Demonstrate proper use and care of hand tools and measuring devices. \n, • Pass the welder qualification test according to job specifications and appropriate codes. \n, • Properly purge and monitor stainless steel piping. \n, • Demonstrate proper use and care of power tools. \n, • Demonstrate proper use and care of a welding machine. \n, • Perform acceptable welds in all positions according to job requirements and governing codes. \n, • Weld must be able to pass a bend or x-ray test. \n, • Perform cleanup duties. \n, • Apply craft-related math skills. \n, • Perform acceptable work at varying heights (such as ladders, scaffolds, etc.). \n, • Ensure proper ventilation for welding (e.g., hexavalent chromium). \n, • Wear a respirator as needed (blood pressure no higher than 150/90). \n, • High School diploma or equivalent. \n, • 3+ years of experience. \n, • Prior nuclear power plant experience, highly desired. \n, • Must be able to obtain nuclear unescorted access, including fitness for duty requirements. \n, • Successful completion of all training including, Radiation Worker Training, Plant Access Training, Fitness for Duty, etc. \n, • Ability to understand and carry out written and oral instructions. \n, • Ability to assemble and disassemble objects and operate small equipment and power tools. \n, • Availability for shift work, if needed. \n, • Ability to support other crafts as requested. \n, • Ability to work at varying heights, in cramped quarters, extreme heat and/or cold, and loud environments (above 89 decibels). \n, • Knowledge of relevant processes and procedures. \n, • Ability to obtain and maintain knowledge of technical manuals and procedures. \n, • Ability to pass specific training and qualifications. \n, • Willingness to work overtime, including shift work, weekends, and holidays as needed. \n, • Visual acuity, balancing, stooping, reaching, walking, manual dexterity, grasping, feeling, hearing, talking. \n, • Capacity to think, concentrate, and focus for long periods. \n, • Ability to read and write complex documents in English. \n, • Capacity to reason and make sound decisions. \n, • Ability to express thoughts orally. \n, • Strategic thinking and planning for growth. \n, • Ability to walk job sites and climb. \n, • Ability to lift a minimum of 50 lbs.\n\n Meet Your Recruiter Kayci Wilbanks

Job Description: PNA is searching for a Welding Operator on 1st shift who is responsible for basic welding to produce per quality specifications in an efficient and safe manner. This role is located at our Charlotte, NC manufacturing facility. PNA Construction Technologies is a business unit of ITW-Illinois Tool Works and specializes in the manufacture and supply of innovative products for the concrete flooring industry. Our products are designed to provide strategic load transfer and joint protection in a concrete slab or pavement. We take pride in our commitment to providing the best performing products in the concrete flatwork industry. Customers also value our top-tier design support, knowledgeable and professional employees, and quality manufactured products made in the USA. Focusing on the needs of our end-users enables us to customize our product offering and service based on their requirements. ITW offers its employees a path for advancement, a competitive salary, and a comprehensive benefits package designed to help employees care for themselves, their families, and their futures. Job Requirements: \n • High School Diploma or GED.\n, • Tack Welding experience preferred.\n, • Experience in use of hand tools, including battery powered hand tools, and pneumatic tools.\n, • Manufacturing experience highly preferred (setup, operate, and knowledge of preventative maintenance).\n, • Focus on quality control.\n, • Clear ability to communicate & instruct on welding assembly.\n, • Team player - able to collaborate with colleagues.\n, • Must be able to lift up to 50 pounds.\n\n Core Responsibilities: \n • Performs ordinary and repetitive hand welding operations.\n, • Operates Welding equipment, regulates current and voltage for proper fusion of metals.\n, • Selects size and type of rod or wire appropriate for metal and welding application.\n, • Makes decisions consistent with priorities set forth by Production Manager or Plant Manager.\n, • Contributes to team effort by accomplishing results as needed for daily production goals.\n, • Follows all safety policies, rules, and best practices.\n, • Facilitate learning/training through a variety of delivery methods including hands-on, and one-on-one to welders of varying skill levels.\n, • Ability to communicate the process of welding plates in alignment with your current position title.\n, • Must be able to test production line units and troubleshoot for production lines.\n\n\n, • Reviews present equipment, production procedures and makes recommendations that may improve productivity and reduce operation cost.\n, • Communicates all issues to Production Manager or Plant Manager to obtain additional resources, or resolutions.\n\n\n, • Prioritizes and maintains workflow and ensures use of proper tools and materials.\n, • Interacts with teammates to resolve problems that interfere with productivity and our culture of respect, trust, and integrity.\n\n\n, • Document actions by completing quality assurance forms consistently and accurately.\n, • Accurately reports daily production.\n\n, • Other duties assigned by Production Manager or other members of management.\n Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential duties and responsibilities of this position, within typical manufacturing working conditions. While performing the duties of this position, the employee will be exposed to fumes, heat and dust, climate variances and moving mechanical equipment typically found in a manufacturing environment. The noise level in the work environment is high when exposed to the manufacturing areas. Certain personal protective equipment is required when in the manufacturing areas. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: While performing the duties of this job, the employee is regularly required to use hands to handle or feel; frequently required to walk, stand, talk, hear, reach with hands and arms and occasionally required to sit on a 4-foot-high forklift. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision and the ability to adjust focus, mount and dismount power industrial vehicle using arms to grip and pull him/herself on to forklift. Employee Benefits: Our employees enjoy competitive, merit-based salaries, plus excellent benefits including: \n • Health, Vision and Dental Insurance\n, • Company Paid Life Insurance/Short and Long-Term Disability\n, • 401k Plan with generous company match\n, • 3 weeks' vacation, 5 sick days, and 8 holidays\n, • End of year company closure\n, • Flexible spending accounts\n\n Compensation Information: $19.50/ hour ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

Job Description: PNA is searching for a Welding Operator on 1st shift who is responsible for basic welding to produce per quality specifications in an efficient and safe manner. This role is located at our Charlotte, NC manufacturing facility. PNA Construction Technologies is a business unit of ITW-Illinois Tool Works and specializes in the manufacture and supply of innovative products for the concrete flooring industry. Our products are designed to provide strategic load transfer and joint protection in a concrete slab or pavement. We take pride in our commitment to providing the best performing products in the concrete flatwork industry. Customers also value our top-tier design support, knowledgeable and professional employees, and quality manufactured products made in the USA. Focusing on the needs of our end-users enables us to customize our product offering and service based on their requirements. ITW offers its employees a path for advancement, a competitive salary, and a comprehensive benefits package designed to help employees care for themselves, their families, and their futures. Job Requirements: \n • High School Diploma or GED.\n, • Tack Welding experience preferred.\n, • Experience in use of hand tools, including battery powered hand tools, and pneumatic tools.\n, • Manufacturing experience highly preferred (setup, operate, and knowledge of preventative maintenance).\n, • Focus on quality control.\n, • Clear ability to communicate & instruct on welding assembly.\n, • Team player - able to collaborate with colleagues.\n, • Must be able to lift up to 50 pounds.\n\n Core Responsibilities: \n • Performs ordinary and repetitive hand welding operations.\n, • Operates Welding equipment, regulates current and voltage for proper fusion of metals.\n, • Selects size and type of rod or wire appropriate for metal and welding application.\n, • Makes decisions consistent with priorities set forth by Production Manager or Plant Manager.\n, • Contributes to team effort by accomplishing results as needed for daily production goals.\n, • Follows all safety policies, rules, and best practices.\n, • Facilitate learning/training through a variety of delivery methods including hands-on, and one-on-one to welders of varying skill levels.\n, • Ability to communicate the process of welding plates in alignment with your current position title.\n, • Must be able to test production line units and troubleshoot for production lines.\n\n\n, • Reviews present equipment, production procedures and makes recommendations that may improve productivity and reduce operation cost.\n, • Communicates all issues to Production Manager or Plant Manager to obtain additional resources, or resolutions.\n\n\n, • Prioritizes and maintains workflow and ensures use of proper tools and materials.\n, • Interacts with teammates to resolve problems that interfere with productivity and our culture of respect, trust, and integrity.\n\n\n, • Document actions by completing quality assurance forms consistently and accurately.\n, • Accurately reports daily production.\n\n, • Other duties assigned by Production Manager or other members of management.\n Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential duties and responsibilities of this position, within typical manufacturing working conditions. While performing the duties of this position, the employee will be exposed to fumes, heat and dust, climate variances and moving mechanical equipment typically found in a manufacturing environment. The noise level in the work environment is high when exposed to the manufacturing areas. Certain personal protective equipment is required when in the manufacturing areas. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: While performing the duties of this job, the employee is regularly required to use hands to handle or feel; frequently required to walk, stand, talk, hear, reach with hands and arms and occasionally required to sit on a 4-foot-high forklift. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision and the ability to adjust focus, mount and dismount power industrial vehicle using arms to grip and pull him/herself on to forklift. Employee Benefits: Our employees enjoy competitive, merit-based salaries, plus excellent benefits including: \n • Health, Vision and Dental Insurance\n, • Company Paid Life Insurance/Short and Long-Term Disability\n, • 401k Plan with generous company match\n, • 3 weeks' vacation, 5 sick days, and 8 holidays\n, • End of year company closure\n, • Flexible spending accounts\n\n Compensation Information: $19.50/ hour ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

A Snapshot of Your Day The primary job requirements of this position are to perform a wide variety of hand skill operations to disassemble / re-assemble turbine rotors and related parts to meet engineering drawing requirements. How You’ll Make an Impact • Work independently and with teammates to complete blading, welding or various other tasks to new and service repair Steam Rotor Turbine components., • Perform a wide variety of operations including but not limited to disassembly through air arc and manual methods, operation of sand blast and hone equipment, and re-assembly of turbine rotors and related parts to meet engineering drawing requirements., • Conduct metal deformation processes via machine and manual methods for rivet forming. Also, conduct various machining operations using manual milling machines, surface grinders, mag base/radial drills for sizing, fitting rotating air foils, and induction heating for component assembly., • Weld and braze activities for joining blade lugs and assembly of blade erosion control., • Use precision instruments to measure frequency, temperature, and size for assembly, fitting and final product quality checks., • Partner with Manufacturing Engineers to resolve challenges and find solutions.What You Bring, • Sound knowledge in the use of basic shop math, reading complex drawings, specifications and use of various precision instruments, • A High School diploma or equivalent is required along with 3-5 years of experience in close tolerance handwork., • Must possess or pass associated 6G weld test, • Have ability to obtain fork truck and critical lift crane licenses. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits #barcode

A Snapshot of Your Day Join our dynamic team in a 4-day, 10-hour night position where your expertise in manual GTAW welding of superalloys, including Inconel and Hastelloy, will shine. You will be responsible for thin wall welding and passing a 6G Butt Joint Open Root, ensuring precision in every task. Flexibility is key as you tackle urgent priorities and effectively complete daily assignments, making a significant impact on our operations. How You'll Make an Impact • Perform a wide variety of layout, fitting, and welding to restore service-ran combustion components to engineered specifications., • Cold work and form components to meet strict tolerance requirements., • Utilize hand tools, grinders, and burrs to recondition surfaces to exact specifications., • Interpret detailed drawings, blueprints, and manufacturer specifications to determine necessary tools for machining operations., • You must pass welding qualification tests for Inconel GMAW 6G Butt Joint Open Root to ISO standards., • A high school diploma along with 1-3 years of industrial welding assembly experience or formal training is required., • Ability to obtain a fork truck and crane license; previous experience is preferred., • Proficiency in basic shop math and the use of precision measuring equipment is essential., • You must pass standard hearing, vision, and PFT tests, and hold a Career Readiness/Work Keys Certificate at Silver Status. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards • \n, • Career growth and development opportunities \n, • Supportive work culture \n, • Company paid Health and wellness benefits \n, • Paid Time Off and paid holidays \n, • 401K savings plan with company match \n, • Family building benefits \n Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Job Description: PNA is searching for a Welding Operator on 1st shift who is responsible for basic welding to produce per quality specifications in an efficient and safe manner. This role is located at our Charlotte, NC manufacturing facility. PNA Construction Technologies is a business unit of ITW-Illinois Tool Works and specializes in the manufacture and supply of innovative products for the concrete flooring industry. Our products are designed to provide strategic load transfer and joint protection in a concrete slab or pavement. We take pride in our commitment to providing the best performing products in the concrete flatwork industry. Customers also value our top-tier design support, knowledgeable and professional employees, and quality manufactured products made in the USA. Focusing on the needs of our end-users enables us to customize our product offering and service based on their requirements. ITW offers its employees a path for advancement, a competitive salary, and a comprehensive benefits package designed to help employees care for themselves, their families, and their futures. Job Requirements: \n • High School Diploma or GED.\n, • Tack Welding experience preferred.\n, • Experience in use of hand tools, including battery powered hand tools, and pneumatic tools.\n, • Manufacturing experience highly preferred (setup, operate, and knowledge of preventative maintenance).\n, • Focus on quality control.\n, • Clear ability to communicate & instruct on welding assembly.\n, • Team player - able to collaborate with colleagues.\n, • Must be able to lift up to 50 pounds.\n\n Core Responsibilities: \n • Performs ordinary and repetitive hand welding operations.\n, • Operates Welding equipment, regulates current and voltage for proper fusion of metals.\n, • Selects size and type of rod or wire appropriate for metal and welding application.\n, • Makes decisions consistent with priorities set forth by Production Manager or Plant Manager.\n, • Contributes to team effort by accomplishing results as needed for daily production goals.\n, • Follows all safety policies, rules, and best practices.\n, • Facilitate learning/training through a variety of delivery methods including hands-on, and one-on-one to welders of varying skill levels.\n, • Ability to communicate the process of welding plates in alignment with your current position title.\n, • Must be able to test production line units and troubleshoot for production lines.\n\n\n, • Reviews present equipment, production procedures and makes recommendations that may improve productivity and reduce operation cost.\n, • Communicates all issues to Production Manager or Plant Manager to obtain additional resources, or resolutions.\n\n\n, • Prioritizes and maintains workflow and ensures use of proper tools and materials.\n, • Interacts with teammates to resolve problems that interfere with productivity and our culture of respect, trust, and integrity.\n\n\n, • Document actions by completing quality assurance forms consistently and accurately.\n, • Accurately reports daily production.\n\n, • Other duties assigned by Production Manager or other members of management.\n Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential duties and responsibilities of this position, within typical manufacturing working conditions. While performing the duties of this position, the employee will be exposed to fumes, heat and dust, climate variances and moving mechanical equipment typically found in a manufacturing environment. The noise level in the work environment is high when exposed to the manufacturing areas. Certain personal protective equipment is required when in the manufacturing areas. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: While performing the duties of this job, the employee is regularly required to use hands to handle or feel; frequently required to walk, stand, talk, hear, reach with hands and arms and occasionally required to sit on a 4-foot-high forklift. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this position include close vision and the ability to adjust focus, mount and dismount power industrial vehicle using arms to grip and pull him/herself on to forklift. Employee Benefits: Our employees enjoy competitive, merit-based salaries, plus excellent benefits including: \n • Health, Vision and Dental Insurance\n, • Company Paid Life Insurance/Short and Long-Term Disability\n, • 401k Plan with generous company match\n, • 3 weeks' vacation, 5 sick days, and 8 holidays\n, • End of year company closure\n, • Flexible spending accounts\n\n Compensation Information: $19.50/ hour ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential. As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship. All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws.

A Snapshot of Your Day The successful candidate will create and maintain routings to support stator operations, create and answer production orders, quickly process quality notifications to minimize production impact, create and maintain detailed spreadsheets of actual versus planned hours, cross functional interaction with lead people and planners on any material issues. Responsibilities may adapt as business needs change. How You'll Make an Impact • Drive continuous improvement by participating in stator planning meetings, completing assigned tasks, and identifying process improvements., • Develop and deliver technical reports, including planned hours vs actuals hours for the different product lines (BK, TLRI, HMPA, etc)., • Closely work with other departments to perform cross campus operations and best practice sharing., • Collaborate with engineering to implement custom tools, jigs, fixtures, and tests into the routings., • Support process improvement qualifications by documenting changes, analyzing data, and verifying sample compliance with requirements., • Education BS/BA in a related discipline or an associate's degree with two or more years of relevant experience and 3 or more years of experience in large stator operations., • Technical Skills: SAP experience is required. Proficiency in Microsoft Office (heavy emphasis on Microsoft Excel), and experience working in cross-functional teams., • Knowledge: Familiarity with production planning principles and cost models; prior experience with document management and leading teams is a plus. Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Find out how you can make a difference at Siemens Energy: Rewards/Benefits • Career growth and development opportunities, • Supportive work culture, • Company paid Health and wellness benefits, • Paid Time Off and paid holidays, • 401K savings plan with company match, • Family building benefits Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more .

Job Description Combo Welder - Nuclear EnergySolutions is hiring nuclear welders for the fall outage season! A Nuclear Combo Welder is a highly skilled professional responsible for the safe application of welding techniques to join, fabricate, and repair metal and other weldable materials within a nuclear facility. This role requires a deep understanding of welding processes to ensure the precise and reliable operation of critical equipment. You will interpret blueprints, specifications, diagrams, or schematics to perform welding processes, ensuring all work complies with relevant codes. Must be able to obtain nuclear unescorted access, including meeting fitness for duty requirements. ESSENTIAL FUNCTIONS: • Perform all job duties safely according to requirements. \n, • Demonstrate proper use and care of hand tools and measuring devices. \n, • Pass the welder qualification test according to job specifications and appropriate codes. \n, • Properly purge and monitor stainless steel piping. \n, • Demonstrate proper use and care of power tools. \n, • Demonstrate proper use and care of a welding machine. \n, • Perform acceptable welds in all positions according to job requirements and governing codes. \n, • Weld must be able to pass a bend or x-ray test. \n, • Perform cleanup duties. \n, • Apply craft-related math skills. \n, • Perform acceptable work at varying heights (such as ladders, scaffolds, etc.). \n, • Ensure proper ventilation for welding (e.g., hexavalent chromium). \n, • Wear a respirator as needed (blood pressure no higher than 150/90). \n, • High School diploma or equivalent. \n, • 3+ years of experience. \n, • Prior nuclear power plant experience, highly desired. \n, • Must be able to obtain nuclear unescorted access, including fitness for duty requirements. \n, • Successful completion of all training including, Radiation Worker Training, Plant Access Training, Fitness for Duty, etc. \n, • Ability to understand and carry out written and oral instructions. \n, • Ability to assemble and disassemble objects and operate small equipment and power tools. \n, • Availability for shift work, if needed. \n, • Ability to support other crafts as requested. \n, • Ability to work at varying heights, in cramped quarters, extreme heat and/or cold, and loud environments (above 89 decibels). \n, • Knowledge of relevant processes and procedures. \n, • Ability to obtain and maintain knowledge of technical manuals and procedures. \n, • Ability to pass specific training and qualifications. \n, • Willingness to work overtime, including shift work, weekends, and holidays as needed. \n, • Visual acuity, balancing, stooping, reaching, walking, manual dexterity, grasping, feeling, hearing, talking. \n, • Capacity to think, concentrate, and focus for long periods. \n, • Ability to read and write complex documents in English. \n, • Capacity to reason and make sound decisions. \n, • Ability to express thoughts orally. \n, • Strategic thinking and planning for growth. \n, • Ability to walk job sites and climb. \n, • Ability to lift a minimum of 50 lbs.\n\n Meet Your Recruiter Kayci Wilbanks

Company Overview: If a culture of excellence, innovation and ownership is what you're searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve's position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: The Welder/ Repair Technician, with a focus in welding is primarily responsible for the repair and fabrication welding of new and customer property nuclear pump components. In addition, they will assist in processes related to disassembly, repair, and assembly of a range of equipment/products including but not limited to rotating equipment, pumps and components. The Welder/ Repair Technician will work with team leads to execute work as provided on work instructions, routers, drawings, and checklists. The Welder/ Repair Technician independently selects and uses the proper equipment required in welding operations as described by work instructions/routers. This position also ensures all forms and documentation are complete prior to submission to quality assurance and/or production supervisors. Work schedule: Monday to Friday from 7:30 am to 3:30 pm. Overtime will be required. Location: Charlotte, NC. Must be available to travel to our site in Memphis, TN when needed. Responsibilities: • Ability to independently, accurately and efficiently weld repair/fabricate new and customer property pump components in the 2G, 3G and 6G positions., • Interface with production supervisor, shop lead, production planner, and project management.-Follow all routers, procedures and Flowserve best practices., • Significant experience with the proper and safe use of various common power and hand tools needed for assembly., • Utilize torches (and other heat sources) and liquid nitrogen properly and safely in the assembly process., • Accurately set up and read precision measuring instruments such as micrometers, dial indicators, calipers, and other gauges., • Ability to work efficiently within fixed time windows for each manufacturing process., • Communicate clearly to peers and supervisors any related job issues., • Coordinate and interface with production management, quality assurance and engineers as necessary., • Paint when required, tag, and prep equipment prior to shipment to the customer., • Utilize cranes, lifting devices, and fork trucks., • Willing to provide input on work process improvement and on developing new tools and hardware as part of on-going Continuous Improvement projects., • HS Diploma / GED and 3-5 years relevant experience, particularly in TIG welding., • Certified, or able to be certified, to weld GTAW/TIG in 2G, 3G and/or 6G positions., • Ability to understand work instructions, safety procedures, and company policies., • Comply with all Flowserve policies and procedures., • Able to read and interpret prints, shop drawings, assembly checklists, and other written work instructions., • Basic computer skills including understanding of Microsoft Office Package, • Ability to prioritize and manage multiple tasks in a fast-paced and changing work environment., • Attention to detail and process-oriented mindset with results driven background., • Must be able to stand for long periods of time and lift up to 25 pounds with a full range of hand and upper-body motion to work with tools and parts., • Must be able to work overtime, weekends, and holidays as the business dictates., • Must be willing to travel to secondary repair facility., • Must be a US citizen., • Fabrication experience within the nuclear, O&G industries., • Excellent communication skills both written and verbal., • Excellent organizational skills, able to problem solve, and prioritize work assignments., • Prior experience working in a fast-paced and unpredictable environment around repair services., • Medical, Dental & Vision Insurance (including FSA and HSA options), • Life Insurance + Supplemental Life, Child, Spousal, and AD&D Insurance, • Short and Long Term Disability, • Retirement Planning, 401(k) plan, & Financial Wellness Resources, • Educational Assistance Program Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Req ID : R-16221 Job Family Group : Operations Job Family : OP Repair Mechanic EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers.com as result of your disability. You can request a reasonable accommodation by sending an email to [email protected]. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

American Equipment Holdings, is one of the leading overhead crane solutions providers in the United States.Over the years, our ability to grow and set ourselves apart from the competition is the result of a tried and true philosophy – take care of our customers and take care of our people.We also

Aerotek - JobID: JP-005595249 [Fabricator] As a Fabricator at Aerotek, you'll: Perform cutting/drilling/assembling; Use a chop saw, read tape, and measure; Use hand tools/drills, drill presses, etc; Lift 50 lbs.

Position Summary: The Welder / Fabricator will demonstrate and work safely in all aspects of the job to determine appropriate welding process.

Aerotek - JobID: JP-005590976 [Fabricator] As a Fitter at Aerotek, you'll: Perform structural fitting on large boiler framework components; Follow the layout and fitting of parts according to blueprints; Assist with pre-fab work as needed, drilling holes, cutting parts, and utilizing an overhead cra

Pipe Welder Mechanical Construction. As a Pipe Welder, you'll be an important part of our field team, working on a variety of challenging and rewarding projects. Certified pipe welder or the ability to pass a pipe weld certification.

JobID: J3W85T6TW74W75FGJMJ [Warehouse Associate / Forklift Operator] As a Forklift Operator at Capstone Logistics, you'll: Handle the movement of pallets and cases on and off trailers and other vehicles; Use a forklift or other material handling equipment.

CEVA Logistics - [Warehouse Associate / Forklift Operator] As a Freight Handler/Forklift Operator at CEVA Logistics, you'll: Load and unload freight using forklifts; Operate forklifts to move materials within the warehouse; Ensure accuracy and efficiency in picking and packing orders; Maintain a cle

XPO Logistics - JobID: 383077 [Warehouse Associate / Forklift Operator] As a Forklift Operator at XPO Logistics, you'll: Operate powered industrial lift trucks and order pickers to push, pull, lift, stack or move product, equipment and materials; Use a handheld scanner; Load and unload trailers; Dis

Schwarz Partners - STS Packaging [Production Operator / Machinist] As a Machine Operator at Schwarz Partners, you'll: Operate machinery to produce high-quality products; Monitor equipment for any malfunctions and perform basic maintenance as needed; Follow safety protocols to ensure a safe working e

Aerotek - JobID: JP-005595019 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines through various tasks ; Perform inspecting, trimming, testing, fixturing, assembling, and packaging products; Perform other duties as assigned

Allegiance Staffing - JobID: 3f60157c-8a0e-49b9-8c23-e7ce9e827b8f [Production Operator / Machinist] As a Machine Operator at Allegiance Staffing, you'll: Operate machinery to produce high-quality products efficiently; Inspect and maintain equipment to ensure optimal performance; Follow safety protoc

Campbell Soup Company - 8600 South Boulevard [Production Operator / Machinist] As a Packaging Machine Operator at Campbell Soup Company, you'll: Operate packaging machines to ensure efficient and accurate packaging of food products; Monitor machine operations and make adjustments as needed to mainta

Campbell Soup Company - 8600 South Boulevard [Production Operator / Machinist] As a Packaging Machine Operator at Campbell Soup Company, you'll: Operate packaging machines to ensure efficient and accurate packaging of food products; Monitor machine operations and make adjustments as needed to mainta

Archdale Dr - [Equipment Operator] - Weekly Pay (Direct Deposit/Onsite Check Delivery) / ACA Compliant Healthcare Benefits (Dental + Vision Coverage) / Employee Bonus Options - As a Machine Operator, you will: Monitor and maintain machines to ensure they are running efficiently and producing quality

Campbell Soup Company - 8600 South Boulevard [Production Operator / Machinist] As a Packaging Machine Operator at Campbell Soup Company, you'll: Operate packaging machines to ensure efficient and accurate packaging of food products; Monitor machine operations and make adjustments as needed to mainta

Manpower - JobID: 5771508 [Production Operator / Machinist] As a Machine Operator at Manpower, you'll: Operate machines to produce goods according to specifications; Monitor equipment for any malfunctions or abnormalities; Adjust settings to ensure quality and efficiency; Maintain a clean and organi

Campbell Soup Company - 8600 South Boulevard [Production Operator / Machinist] As a Packaging Machine Operator at Campbell Soup Company, you'll: Operate packaging machines to ensure efficient and accurate packaging of food products; Monitor machine operations and make adjustments as needed to mainta

Campbell Soup Company - 8600 South Boulevard [Production Operator / Machinist] As a Packaging Machine Operator at Campbell Soup Company, you'll: Operate packaging machines to ensure efficient and accurate packaging of food products; Monitor machine operations and make adjustments as needed to mainta

PrideStaff - 566219 [Production Operator / Machinist] As a Machine Operator at PrideStaff, you'll: Set up fully automated computer controlled machinery; Respond to work order requests; Coordinate material requirements with production control and stock room; Interface with production control and insp

Archdale Dr - [Laborer] - Weekly Pay (Direct Deposit/Onsite Check Delivery) / ACA Compliant Healthcare Benefits (Dental + Vision Coverage) / Employee Bonus Options - As a General Laborer with Luxor Staffing, you will: Perform various physical tasks such as lifting, moving, and organizing materials;

Campbell Soup Company - 10230 Pineville Distribution St.Warehouse Associate / Package Handler] As a Material Handler at Campbell Soup Company, you'll: Handle and transport raw materials and finished products within the manufacturing facility; Operate forklifts and other equipment to load and unload